LYRA​

LYRA is a true wireless data acquisition system consisting of LYRASens (vibration/temperature), LYRALink (IO-Link and analogue interface) and LYRAGate (gateway with Modbus interface for data transfer in MoonStone). 

Our sub-GHz wireless radio technology grants for long reading range in harsh industrial environments. Its bi-directional communication allows to configure and maintain the system remotely. The TDMA/FHSS MAC ensures the time synchronisation below 0.1ms between all connected devices so that structured data is acquired. 

LYRA acquires trend and raw data. 

  • Trend data is physical parameters such as overall vibrations, temperatures, power, pressure, flows,.... collected typically every hour. LYRA acquires SCADA data (modbus RTU/TCP) with LYRAGate, sensors data (IO-Link or analogue inputs) with LYRALink or overall vibration data with LYRASens. Trend data is collected on schedule and is used to build Digital Twins.
  • Raw data is a large set of acceleration data (up to 100k data) collected at high sampling rate (up to 4kHz) with LYRASens. Raw data is collected on schedule or on event and is used for the vibration analysis of rotating machines and in robotic.
 

LYRASens

  • ​Vibration (3 axis)
  • Temperature
  • Frequency: DC to 1.6kHz
  • Sampling up to 4ks/s
  • Sensitivity: +/- 2..8g
  • Inte​ rnal memory for approx. 100k raw data
  • Event-based acquisition with pre-triggering function
  • Built-in configurable HP filters

LYRAGate

  • Connection of up to 80 LYRASens
  • 4x analogue inputs (4..20mA or 0..10V)
  • Built-in Modbus TCP/RTU
  • PoE for direct powering of modems


LYRALink

  • Analogue interface (0..10V, 4..20mA)
  • IO-Link interface (temperature, RFID, RPM, ...)
  • Sampling up to 12kHz
  • Resolution: 12bits
  • Internal memory for approx. 50k raw data ​

LYRAMesh

  • Autonomous Self-Adapted Mesh Network System
  • Long-Range Dual Band Radio Modem
  • EU863-870/US902-928 (software switchable)
  • IEEE 802.15.4g, WI-SUN® FAN1.1. ready (IPv6)
  • Bi-direction communication
  • Resolution: 12bits
  • 1W output

LYRA Architecture

LYRA radio communication:

  • Long Range Dual-Band Radio Modem
  • EU863-870/US902-928 (software switchable)
  • STAR topology
  • FHSS MAC
  • Datarate up to 133kbits/s (per channel / FHSS / UP-DOWN)
  • Up to 1W output power (30dBm)

Internet connection requirements :

  • DHCP service to be able to get an IP address on the LAN
  • NTP service such that the gateway is on time (necessary for security reasons and validity of the certificates)
  • The port 8883 open. This is the port used by our secured MQTT using TLS v1.3